Protected 2200mAh 18650 Lithium Ion Battery (testing sample sale)

Clearance sale of our battery testing samples. These cells were used as testing sample, more specifically the long term characterization.

3,00 

Out of stock

Category: SKU: HHTB000002

Description

This is a battery for which international shipping restriction apply. For this reason shipping is restricted to EU countries and a limited set of shipping carriers. See our shipping information page for more details.

Clearance sale of our battery testing samples. These cells were used as testing sample, more specifically the long term characterization. All cells subject to sale were cycled 5 times (fully charged, then discharged to 2.5V at 600mA) before being charged and put on a shelf. The cell voltage was then monitored over an average of 2.5 years. Now we’ve completed our test plan, we have a bunch of well aged but not used cell to your disposal! Hurry while they’re available 🙂

If you need brand new cells, have a look at our awesome 2600mAh 18650 cells.

Features

  • True 2200mAh capacity lithium ion cell
  • 40mm wire with JST-PH 2 pin connector
  • Dimensions (Ø x H): 18x65mm
  • Nominal voltage: 3.6V
  • Charge termination target: 4.2V
  • Typical charge current: 0.5C
  • Max. charge current 1C
  • Weight: ~47g
  • Max. discharge current: 1.5C
  • Has your back covered / Built-in protection:
    • Over-discharge threshold: 2.5V
    • Over-charge threshold: 4.3V
    • Over-current threshold: 3.5A

What can I do with one of these batteries?

Lithium ion and lithium polymer batteries are currently the most used batteries in rechargeable consumer electronic products. Your smartphone contains one, as do notebooks and many electric cars. What we mean is that your imagination is probably the limit.

The thing to know however is that you will probably need some additional circuitry to be able to use a lithium battery with your projects.

First and foremost, you’ll need some mean of charging the battery (see the note on that below).

Secondly, you’ll probably need to do some voltage conversion, as lithium batteries have a fairly wide usable voltage range. This very cell will have about 4.2V when fully charged, and can be depleted down to 2.5V without taking damage.

Many of the boards you’ll want to connect require a fixed (and ideally stable) voltage, which means you’ll have to add some conversion:

  • the easiest one is if you need a fixed voltage that is higher (or lower) than the usable range of the battery. You’ll be able to use a buck or a boost converter
  • if you need an output voltage which is inside the range, you’ll want either:
    • a SEPIC converter (which can do seamless step-up and step-down conversion)
    • or to chain a boost with a buck converter or a linear regulator

If that all sound terribly complicated for you, why don’t you give our PGCPSU DUO a try? It does all the above for you in a tiny package, plus it has the right connector, making this a true plug&play experience!

On charging Lithium Ion Batteries

Lithium batteries require a so-called CC/CV (“constant current”/”constant voltage”) charge cycle. Typically you’ll want to use a specialized charging circuit such as our PGCPSU boards to avoid issues.

Please note that charging the batteries in an unsafe way can be dangerous and cause fire or injury! Take precautions as necessary!

Additional information

Weight 0,05 kg
Dimensions 10 × 3 × 3 cm

Reviews

There are no reviews yet.

Be the first to review “Protected 2200mAh 18650 Lithium Ion Battery (testing sample sale)”

Your email address will not be published. Required fields are marked *

You may also like…